|Year : 2022 | Volume
| Issue : 4 | Page : 131-136
Anesthetic gas consumption with target-controlled administration versus a semi-closed circle system with automatic end-tidal concentration control in an artificial lung model
Martin Bellgardt1, Vladimir Vinnikov1, Adrian Iustin Georgevici1, Livia Procopiuc2, Thomas Peter Weber1, Andreas Meiser3, Jennifer Herzog-Niescery1, Dominik Drees1
1 Department of Anesthesiology and Intensive Care Medicine, St. Josef Hospital, Katholisches Klinikum Bochum, University Hospital, Ruhr-University of Bochum, Bochum, Germany
2 Paediatric Intensive Care Unit – Evelina London Children’s Healthcare, Guy’s and St. Thomas, NHS, London, UK
3 Department of Anesthesiology, Intensive Care Medicine and Pain Medicine, Saarland University Medical Centre, University of Saarland, Homburg/Saar, Germany
|Date of Submission||10-Mar-2021|
|Date of Decision||14-Apr-2021|
|Date of Acceptance||25-Jun-2021|
|Date of Web Publication||17-Apr-2022|
Department of Anesthesiology and Intensive Care Medicine, St. Josef Hospital, Katholisches Klinikum Bochum, University Hospital, Ruhr-University of Bochum, Bochum
Source of Support: None, Conflict of Interest: None
The use of volatile anesthetics as sedatives in the intensive care unit is relevant to the patient’s outcome. We compared anesthetic gas consumption of the conventional semi-closed Aisys CSTM with the MIRUSTM system, which is the first anesthetic gas reflector system that can administer desflurane in addition to isoflurane and sevoflurane. We connected an artificial lung model to either a MIRUSTM system and a Puritan BennettTM 840 ventilator or an Aisys CSTM anesthesia machine. We found that consumption of 0.5% isoflurane, which corresponds to the target concentration 0.5 MAC, was averaged to 2 mL/h in the MIRUSTM system, which is identical to the Aisys CSTM at a fresh gas flow (FGF) of 1.0 L/min. MIRUSTM consumption of 1% sevoflurane was averaged to 10 mL/h, which corresponds to 8.4 mL/h at FGF 2.5 L/min. The MIRUSTM system consumed 3% or 4% desflurane at an average of 13.0 mL/h or 21.3 mL/h, which is between the consumption at 1.0 L/min and 2.5 L/min FGF. Thus, the MIRUSTM system can effectively deliver volatile anesthetics in clinically relevant concentrations in a similar rate as a conventional circular breathing system at FGFs between 1.0 L/min and 2.5 L/min.
Keywords: anesthesia; circle system; consumption; desflurane; isoflurane; MIRUS; reflection; sevoflurane; volatile anesthetics; wash-out
|How to cite this article:|
Bellgardt M, Vinnikov V, Georgevici AI, Procopiuc L, Weber TP, Meiser A, Herzog-Niescery J, Drees D. Anesthetic gas consumption with target-controlled administration versus a semi-closed circle system with automatic end-tidal concentration control in an artificial lung model. Med Gas Res 2022;12:131-6
|How to cite this URL:|
Bellgardt M, Vinnikov V, Georgevici AI, Procopiuc L, Weber TP, Meiser A, Herzog-Niescery J, Drees D. Anesthetic gas consumption with target-controlled administration versus a semi-closed circle system with automatic end-tidal concentration control in an artificial lung model. Med Gas Res [serial online] 2022 [cited 2022 May 27];12:131-6. Available from: https://www.medgasres.com/text.asp?2022/12/4/131/337991
| Introduction|| |
Since the description of the circle system by Dräger and Roth in 1902, fresh gas flow (FGF) determined consumption and control of volatile agents. However, an alternative to the circle system – the reflection system – was described in 1989. In 2001, Enlund et al. described for the first time the use of the reflection method in clinical practice. One year later, the same authors published the use of such a device with 0.9% sevoflurane in a similar clinical setting. The consumption of this device correlated with that of a circle system with a FGF of 1.5 L/min.
Currently, two devices using the reflection method are commercially available: (i) AnaConDa® (Sedana Medical, Danderyd, Sweden), and (ii) MIRUSTM (TIM, Koblenz, Germany)., In addition, a small-volume AnaConDa® device with only 50 mL internal volume (AnaConDa®-S) instead of 100 mL in the previous model (AnaConDa®) was developed in order to reduce dead space. This miniaturization is expected to improve carbon dioxide dissipation but also to reduce anesthetic reflection. Indeed, we recently demonstrated that consumption of isoflurane and sevoflurane by both AnaConDa®-S and AnaConDa® is comparable to consumption of a circle system with a FGF of up to 1.0 L/min.
Desflurane shows favorable kinetics, and it is less metabolized than sevoflurane., However, the low boiling point of desflurane makes its administration more challenging than administration of isoflurane or sevoflurane. Unlike the AnaConDa® devices, the MIRUSTM system can be used and is licensed for administration of desflurane.
The aim of this study was to compare consumption, enhancement, and release of isoflurane, sevoflurane, and desflurane in the MIRUSTM system versus the Aisys CSTM at FGF ranging between 0.5–5.0 L/min.
| Materials and Methods|| |
A plastic tank with a volume of 3.9 L (HPL 829, Lock & Lock, iSi Deutschland GmbH Solingen, Germany) served as a test lung. There were three ports on the upper lid of the tank. One port was connected with two bag valve units (volume 2 L each, accessory for ZeusTM, Dräger Medical) via a Y-piece (6515-12-339-4401, Dräger Medical, Lübeck, Germany). The second port facilitated insufflation of carbon dioxide (AirLiquide Deutschland GmbH, Düsseldorf, Germany). The third port was connected with the respective ventilator via a tube elongation (Gänsegurgel 22F-22M/15, P.J. Dahlhausen & Co., Cologne, Germany). The concentration of carbon dioxide was monitored on the side of the test lung, and was maintained between 20 and 40 mmHg. All experiments were performed under normal pressure and ambient temperature.
The Aisys CSTM anesthesia Ventilator
The Aisys CSTM anesthesia ventilator (GE Healthcare, Chalfont St. Giles, UK) is equipped with a classical circle system, and an automatic control for end-tidal anesthetic concentration (Fet). Different FGFs and ascending target Fet were chosen as described below. Anesthetic consumption was documented as displayed by the Aisys CSTM. The Aisys CSTM was connected with the test lung via a heat moisture exchanger (HME; DARTM, Covidien, Mansfield, MA, USA). For wash out, the target Fet was set to zero and the HME was left in place [Figure 1]A.
|Figure 1: Experimental setups used in this study.|
Note: (A) The circle breathing system is connected to the test lung (right side), which is equipped with two bag-valve units (BV), each with a volume of 2 L. Air (1) and oxygen (2) are connected to an anesthesia gas scavenging system (3). The Aisys CSTM (4), which consists of an electronic control mechanism and the Aladin 2 vaporization cassette, is connected to the test lung box via a heat moisture exchanger (5). (B) The MIRUSTM system (left), which is ventilated by a Bennett 840 ventilator with air (1) and oxygen (2), is connected to an anesthesia gas scavenging system (3). The ventilator is connected with a Y-piece to the Mirus Controller unit and the Exchanger unit (4). The MIRUSTM device is connected to the test lung (right side) with two BV and 2 L volume each via a heat moisture exchanger (5). Gas samples are collected at the test lung and analyzed by a gas monitor. ICU: Intensive care unit.
Click here to view
The MIRUSTM system
The MIRUSTM system is a new device for administration of anesthetics via common intensive care ventilators. The device also uses anesthetic reflection instead of a circle system in order to reduce consumption of the applied anesthetic. The MIRUSTM device consists of a control unit (MIRUSTM Controller) and an interface (MIRUSTM Exchanger), which are inserted between a Y-piece and the patient (or test lung). Controller and Exchanger are connected by a multi-lumen cable for anesthetic administration, as well as for gas, pressure, and flow monitoring. Like Aisys CSTM, the MIRUSTM system also controls the Fet automatically. The speed of wash-in can be selected in three steps, i.e., low (symbolized by a tortoise), normal (hare), and high speed (cheetah). In this study, the normal speed was selected by default. Consumption at the different target Fet was calculated via the filling level indicator of the MIRUSTM device. For wash-out, the target Fet was set to zero, and the MIRUSTM Exchanger was left in place [Figure 1]B.
A Puriton Bennett 840 ventilator (PB-840, Medtronics, Minneapolis, MN, USA) was used with the MIRUSTM system for ventilation. In case of the Aisys CSTM, default ventilation of the test lung was performed with decelerating flow in volume controlled mode (SIMV-Volume Control plus) with 500 mL tidal volume, 10 breaths/min respiratory rate, 2 seconds inspiration time, 0.5 kPa positive end-expiratory pressure, and 21% oxygen. The same ventilation settings were used for wash-out. In addition, wash-out was monitored for all experiments at high minute ventilation using the same settings as stated above, except for 1000 mL tidal volume and 20 breaths/min respiratory rate.
Three anesthetics (isoflurane, sevoflurane, and desflurane) were tested in two experimental setups (i.e., Aisys CSTM and MIRUSTM system (plus PB-840)) as described in [Figure 1]. Four different FGFs (i.e., 0.5, 1.0, 2.5, and 5.0 L/min) were used with the Aisys CSTM. Ascending target Fet were 0.5%, 1.0%, 1.5%, 2.0%, and 2.5% for both isoflurane and sevoflurane, and 1%, 2%, 3%, 4%, 5%, and 6% for desflurane. The increase in Fet was performed stepwise, which yielded extended wash-in times. After wash-in, the concentration was maintained for 30 minutes, and anesthetic consumption was measured as mentioned above. Projected consumption of the gas in a clinical setting was calculated using the following formula:
Projected clinical consumption of volatile anesthetics (mL/h) = consumption of model at defined concentration (mL/h) × (target Fet / target concentration) × (initial minute volume [L/min] / 5 [L/min]).
After each experimental cycle, anesthetic administration was stopped, and all times were recorded to reach 2.0%, 1.5%, 1.0%, 0.5%, and 0% isoflurane or sevoflurane, or 5.0%, 4.0%, 3.0%, 2.0%, 1.0%, and 0% desflurane, respectively. In addition, the same wash-out times were recorded with an increased minute ventilation of 20 L/min. All experimental cycles were repeated three times.
Data are expressed as mean ± standard deviation (SD) as well as mean ± standard error of the mean (SEM), 95% bias-corrected and accelerated confidence intervals in the supplementary material. Differences between the Aisys CSTM and MIRUSTM system regarding wash-in times (0–2.5% and 0–6%, respectively) and wash-out times (2.5–0% and 6–0%, respectively) were tested via univariate analysis of variance (ANOVA) for each anesthetic, modeling the ‘between’ factor “device” (MIRUSTM vs. Aisys CSTM: 0.5, 1.0, 2.5, 5.0 L/min FGF). Follow-up tests were performed for significant main effects via Dunnett t-tests with the MIRUSTM 5 L or 20 L as a reference category. Follow-up tests for the comparison of adjacent FGF increments (0.5% vs. 1.0%, 1.0% vs. 2.5%, 2.5% vs. 5% L/min FGF) were performed with Sidak correction for multiple comparisons.
Mixed model ANOVA with the ‘between’ factor “device” (MIRUSTM vs. Aisys CSTM, FGF 0.5, 1.0, 2.5, 5.0 L/min), and the ‘within’ factors “targeted concentration” (0.5%, 1.0%, 1.5%, 2.0%, and 2.5% for isoflurane and sevoflurane; 1%, 2%, 3%, 4%, 5%, and 6% for desflurane) were conducted separately for the consumption phase of each anesthetic. A univariate ANOVA was performed for significant interactions. Here, each level of the “within” factor was investigated for differences between and within MIRUSTM vs. Aisys CSTM. A significant main effect “device” of the univariate ANOVA was further investigated via Sidak corrected comparison of adjacent FGF increments (0.5% vs. 1.0%, 1.0% vs. 2.5%, 2.5% vs. 5% L/min FGF). For each univariate ANOVA, the corrected R2 (R2c) is reported as a measure of explained variance.
Since the sample size in this study was low, statistical analyses were considered as a rough estimation of the real effect. However, the error-related variance is minimal in this model-based experimental setting. To offer the best possible estimation of the effect, statistical analyses was based on a 1000 sample-bootstrapping approach, reporting 95% bias-corrected and accelerated confidence intervals for each mean or mean difference (see supplementary information). Statistical significance was accepted at an error probability of P ≤ 0.05. Data analysis was performed using SPSS Statistics 24 (IBM, Armonk, NY, USA).
| Results|| |
The wash-in of isoflurane, sevoflurane, and desflurane decreased from 0.5 L/min to 5.0 L/min FGF, although no significant difference between adjacent FGF increments was found (isoflurane: P > 0.999, sevoflurane: P ≥ 0.109, desflurane: P ≥ 0.956; [Table 1]). For all testes anesthetics, wash-in was faster for the Aisys CSTM than for the MIRUSTM system (P < 0.001; Additional Table 1 [Additional file 1]).
|Table 1: Wash-in time of isoflurane, sevoflurane, and desflurane in the Aisys CSTM fresh gas flow and the MIRUSTM system|
Click here to view
The concentration of isoflurane, sevoflurane, and desflurane showed a statistically significant effect on the consumption in both Aisys CSTM and MIRUSTM system (interaction “consumption x device”: isoflurane: F(4.6,11.5) = 239.72, P < 0.001; sevoflurane: F(6.5,16.4) = 176.3, P < 0.001; desflurane: F(5.2,14.3) = 68.08, P < 0.001; [Table 2] and Additional Table 2 [Additional file 2]).
|Table 2: Consumption (mL/h) of isoflurane, sevoflurane, and desflurane related to the Aisys CSTM fresh gas flow, and the MIRUSTM system|
Click here to view
Consumption of isoflurane 0 % to 2.5 % increased significantly from 0.5 L/min to 5.0 L/min FGF (P < 0.001; [Figure 2]A and Additional Table 2). At 0.5% isoflurane, the MIRUSTM system consumes an average of 2 mL/h, which is identical to the Aisys CSTM at 1.0 L/min FGF. The MIRUSTM system showed consumption between 1.0 L/min and 2.5 L/min FGF in the Aisys CSTM for 1.0% and 1.5% isoflurane. At higher concentrations, the consumption was between 2.5 L/min and 5.0 L/min FGF.
|Figure 2: Consumption of isoflurane (A), sevoflurane (B), and desflurane (C) in the Aisys CSTM fresh gas flow and the MIRUSTM system after wash-in.|
Note: Each circle represents one of three independent measurements.
Click here to view
Similar to isoflurane, consumption of sevoflurane at 1.5% and 2.5% increased significantly from 0.5 L/min to 5.0 L/min FGF (≤ 0.013; [Figure 2]B and Additional Table 2), whereas consumption of sevoflurane at 0.5%, 1.0% and 2.0% increased significantly from 1.0 L/min to 5.0 L/min FGF (P ≤ 0.007). Nonetheless, consumption of the MIRUSTM system was higher and similar to 2.5 L/min FGF. For example, at 1%, the MIRUSTM system consumed an average of 10 mL/h, which is comparable to the Aisys CSTM at FGF 2.5 L/min (8.4 mL/h). At higher concentrations, the consumption of the MIRUSTM system was between 2.5 L/min and 5.0 L/min FGF.
Consumption of desflurane 0% to 6.0% increased significantly with higher FGF (starting at 0.5 or 1.0 L/min, P ≤ 0.023; [Figure 2]C and Additional Table 2). The MIRUSTM system showed at 1% and 2% desflurane a consumption similar to 1.0 L/min FGF (P = 0.998 and P = 0.982). At 3% and 4% desflurane, the consumption of the MIRUSTM system was between 1.0 L/min and 2.5 L/min FGF. At the highest tested concentrations of 5% and 6%, the consumption did not show a statistically significant difference FGF of 2.5 L/min (P = 0.192 and P = 0.598; [Table 2]), and hence were deemed as comparable.
The wash-out of isoflurane, sevoflurane, and desflurane increased from 0.5 L/min to 5.0 L/min FGF (P < 0.001; [Table 3] and Additional Table 3 [Additional file 3]). The MIRUSTM system with 5 L minute volume showed a performance between 1.0 L/min and 2.5 L/min FGF for isoflurane, and a similar performance to 1.0 L/min FGF for sevoflurane (P = 0.373) and desflurane (P > 0.999; [Figure 3]). By contrast, the MIRUSTM system with 20 L high minute volume performed similarly to 5.0 L/min FGF for all three anesthetics (P > 0.999).
|Figure 3: Wash-out of isoflurane (A), sevoflurane (B), and desflurane (C) in the Aisys CSTM fresh gas flow and the MIRUSTM system.|
Note: The dashed lines indicate the minimum alveolar concentration for each anesthetic agent. Each circle represents one out of four independent measurements.
Click here to view
|Table 3: Wash-out time of isoflurane, sevoflurane, and desflurane in the Aisys CSTM fresh gas flow and the MIRUSTM system|
Click here to view
| Discussion|| |
This study compares the consumption and the wash-out of isoflurane, sevoflurane, and desflurane in the MIRUSTM and the Aisys CSTM systems in a laboratory model.
The Aisys CSTM showed a correlation between FGF and duration to reach the defined target concentration, which agreed with previous works., Nevertheless, a previous study that did not observe such correlation suggested an automated regulation by the AladinTM cassette of the Aisys CSTM anesthesia ventilator.
Comparison between Aisys CSTM and MIRUSTM system indicated a faster wash-in of the tested anesthetics in the circle breathing system. The MIRUSTM system allows three different settings of wash-in, but we assessed only one speed in this study. Of note, the stepwise increase of the target Fet resulted in extended wash-in times. A recent randomized controlled trial showed that the MIRUSTM system reached a minimum alveolar concentration (MAC) of 0.5 within two minutes for isoflurane, sevoflurane, and desflurane. Further increase to 1.0 MAC showed a comparable duration of approximately 2 minutes. These times are faster than the findings in this presented study. Further contradiction comes from an earlier randomized controlled study on cardiac surgery patients, which compared an AnaConDa® device with a circle breathing system and found that the device reached 0.5 MAC for 1% sevoflurane within 5 minutes. The differences between the results of both randomized controlled trials and our laboratory model can likely be attributed to the smaller volume of distribution. Another contributing factor is the breathing rate, which was 10 breaths per minute in our laboratory model. By contrast, the randomized controlled study did not indicate a breathing rate, but the minute ventilation was 20% higher. Since the MIRUSTM system applies a defined volume of volatile anesthetics during the inspiration phase, the MAC is restricted by the breathing rate. Depending on the selected speed, the MAC varies for each anesthetic gas. Moreover, volatile anesthetics must be delivered to the organs and the tissues after entering the bloodstream. The speed of distribution depends on the cardiac index, which could not be accurately modelled by the laboratory model of this study.
The consumption of isoflurane, sevoflurane, and desflurane correlated with the increase in FGF. The minute volume of the MIRUSTM system did not change during consumption; however, increasing the minute volume yields a corresponding increase in consumption. By contrast, changes and dimension of the minute volume are not relevant for circle breathing systems. Another notable finding is the divergent tendency of the MIRUSTM system interpolation curve for the consumption of all three gases at 3%. This divergence corresponds most likely to the spillover effect described for desflurane. Hence, the results at higher concentration might not accurately reflect the precise consumption.
The performance of the MIRUSTM system in our study has also important ramifications for the clinical setting. Sedation with isoflurane in the intensive care unit requires 0.5 MAC (0.5%). In contrast, consumption for 0.5 MAC (1.0%) sevoflurane was relatively high with 10–15 mL/h, and was comparable to consumption for 0.5 MAC (3.0%) desflurane. Hence, the MIRUSTM reflection system demonstrated a poorer performance for sevoflurane than for isoflurane. The AnaConDa® device, however, showed a comparable consumption for both isoflurane and sevoflurane, which is likely due to the carbon fibers in that system. An earlier study demonstrated that integration of such carbon fibers into the MIRUSTM system improved the reflection of desflurane. In our study, the consumption of 3% desflurane was projected as 13 mL/h and agreed with the observed 17 mL/h in this earlier study. Similarly, projection of isoflurane consumption in our model system was 4.128 mL/h, and matched closely a recent randomized controlled trial, which found a consumption of 4.0 mL/h. By contrast, the consumption of sevoflurane was projected to be 11.7 mL/h, thus exceeding the consumption of 7.9 mL/h that was reported in a prospective interventional study.
Wash-out times with MIRUSTM system corresponded to the times with the Aisys CSTM between 1.0 L/min and 2.5 L/min FGF for all three gases for a minute volume of 5 L, and 5.0 L/min FGF for a 20 L high minute volume.
The results for both Aisys CSTM and MIRUSTM system showed exponential curve progressions that were comparable to the wash-out in the clinic setting. In hospital, the MACawake is a crucial parameter for the awakening of the patient. Patients awake as soon as the concentration of the volatile anesthetic agent falls below 0.35 MAC. The corresponding wash-out time for isoflurane was more than 20 minutes, and thus the longest in our study. Hence, we recommend removing the MIRUSTM reflector, and aiming for a high minute volume. Furthermore, the wash-out should be performed at a low Fet. Removal of the reflector is an optional improvement for sevoflurane. For the less potent desflurane, the removal of the MIRUSTM reflector is irrelevant, since the MACawake falls below 2.0–2.4 within 5 minutes.,
The results of our laboratory model might differ from human studies. We performed our experiments under ambient temperature pressure, saturated, and added volatile anesthetics and CO2. We did not implement a body temperature pressure, saturated condition, and we did not study the influence of either ambient or body temperature pressure, as this was beyond the scope of the study. Nonetheless, we assume that these conditions likely affected CO2 reflection, which is lower under body temperature pressure, saturated.
As described in previous studies,, we injected the volatile anesthetic agent directly into the test lung in order to avoid any interferences by administration. The concentration of the anesthetic gas was measured inside the test lung, since measurements of gas concentrations at the sampling port might have produced erroneous readings of the end-tidal concentration.,
All presented measurements in this study were repeated three times and showed only marginal deviation as presented in [Figure 2]. Maximum measurement errors of concentrations, which were measured by the gas monitor, and flow, which was measured at the ventilator, were around 5%, according to the manufacturer’s specifications. This error is expected to be less under the controlled laboratory conditions.
In summary, our study demonstrated that the MIRUSTM system delivers clinically relevant concentrations of anesthetic gas with satisfactory performance. Moreover, the consumption matched that of a conventional anesthesia device at a FGF between 1 L/min for isoflurane and desflurane, and 2.5 L/min for sevoflurane.
Thanks go to Dr. Magdalene Ortmann for statistical advice and analysis of the study.
Study design and data analysis: MB, DD, AM, JHN, TW; study implementation and statistical analysis: MB, DD, VV, AG; data collection: DD, VV, LP, AG; manuscript writing: MB, DD; manuscript revision: MB, DD, JHN, AM. All authors revised the manuscript and approved the final version.
Conflicts of interest
The authors declare that there is no conflict of interest.
Availability of data and materials
All data generated or analyzed during this study are included in this published article and its supplementary information files.
Open access statement
This is an open access journal, and articles are distributed under the terms of the Creative Commons AttributionNonCommercial-ShareAlike 4.0 License, which allows others to remix, tweak, and build upon the work non-commercially, as long as appropriate credit is given and the new creations are licensed under the identical terms.Additional files
Additional Table 1: Wash-in of isoflurane (0% to 2.5%), sevoflurane (0% to 2.5%) and desflurane (0% to 6%) of the Aisys CSTM fresh gas flow compared to the MIRUSTM system.
Additional Table 2: Consumption time of isoflurane, sevoflurane and desflurane in the Aisys CSTM fresh gas flow, and the MIRUSTM system.
Additional Table 3: Wash-out time of isoflurane (2.5% to 0%), sevoflurane (2.5% to 0 %) and desflurane (6 % to 0 %) in the Aisys CSTM fresh gas flow, and the MIRUSTM system.
| References|| |
The roth-drager oxygen and chloroform apparatus. Br Med J
Thomasson R, Luttropp HH, Werner O. A reflection filter for isoflurane and other anaesthetic vapours. Eur J Anaesthesiol
Enlund M, Wiklund L, Lambert H. A new device to reduce the consumption of a halogenated anaesthetic agent. Anaesthesia
Enlund M, Lambert H, Wiklund L. The sevoflurane saving capacity of a new anaesthetic agent conserving device compared with a low flow circle system. Acta Anaesthesiol Scand
Bomberg H, Glas M, Groesdonk VH, et al. A novel device for target controlled administration and reflection of desflurane--the MirusTM
Bomberg H, Groesdonk HV, Bellgardt M, Volk T, Meiser A. AnaConDaTM
for intensive care sedation, 24 h desflurane versus isoflurane in one patient. Springerplus
Bellgardt M, Drees D, Vinnikov V, et al. In vitro performance evaluation of AnaConDa(TM)-100 and AnaConDa(TM)-50 compared to a circle breathing system for control and consumption of volatile anaesthetics. J Clin Monit Comput
. 2020:1-9.doi: 10.1007/s10877-020-00634-4.
Bennett JA, Lingaraju N, Horrow JC, McElrath T, Keykhah MM. Elderly patients recover more rapidly from desflurane than from isoflurane anesthesia. J Clin Anesth
Röhm KD, Mengistu A, Boldt J, Mayer J, Beck G, Piper SN. Renal integrity in sevoflurane sedation in the intensive care unit with the anesthetic-conserving device: a comparison with intravenous propofol sedation. Anesth Analg
Jakobsson P, Lindgren M, Jakobsson JG. Wash-in and wash-out of sevoflurane in a test-lung model: A comparison between Aisys and FLOW-i. F1000Res
Leijonhufvud F, Jöneby F, Jakobsson JG. The impact of fresh gas flow on wash-in, wash-out time and gas consumption for sevoflurane and desflurane, comparing two anaesthesia machines, a test-lung study. F1000Res
Bellgardt M, Drees D, Vinnikov V, et al. Use of the MIRUSTM
system for general anaesthesia during surgery: a comparison of isoflurane, sevoflurane and desflurane. J Clin Monit Comput
Sturesson LW, Johansson A, Bodelsson M, Malmkvist G. Wash-in kinetics for sevoflurane using a disposable delivery system (AnaConDa) in cardiac surgery patients. Br J Anaesth
Eger EI, 2nd, Larson CP, Jr. Anaesthetic solubility in blood and tissues: values and significance. Br J Anaesth
Bomberg H, Volk T, Groesdonk HV, Meiser A. Efficient application of volatile anaesthetics: total rebreathing or specific reflection? J Clin Monit Comput
Bellgardt M, Georgevici AI, Klutzny M, et al. Use of MIRUSTM
for MAC-driven application of isoflurane, sevoflurane, and desflurane in postoperative ICU patients: a randomized controlled trial. Ann Intensive Care
Romagnoli S, Chelazzi C, Villa G, et al. The new MIRUS system for short-term sedation in postsurgical ICU patients. Crit Care Med
La Colla L, Albertin A, La Colla G, Mangano A. Faster wash-out and recovery for desflurane vs sevoflurane in morbidly obese patients when no premedication is used. Br J Anaesth
Bomberg H, Veddeler M, Volk T, Groesdonk HV, Meiser A. Volumetric and reflective device dead space of anaesthetic reflectors under different conditions. J Clin Monit Comput
Bomberg H, Wessendorf M, Bellgardt M, et al. Evaluating the efficiency of desflurane reflection in two commercially available reflectors. J Clin Monit Comput
Meiser A, Bellgardt M, Vogelsang H, Sirtl C, Weber T. Functioning of the anaesthetic conserving device: aspects to consider for use in inhalational sedation. Anaesthesist
Meiser A, Laubenthal H. Inhalational anaesthetics in the ICU: theory and practice of inhalational sedation in the ICU, economics, risk-benefit. Best Pract Res Clin Anaesthesiol
[Figure 1], [Figure 2], [Figure 3]
[Table 1], [Table 2], [Table 3]